更新结构

nodemcuv2/lv_arduino/examples/ESP32_TFT_eSPI_Slider/Callbacks.ino

@@ -0,0 +1,46 @@
+
+void slider_event_cb(lv_obj_t * slider, lv_event_t event)
+{
+
+  printEvent("Slider", event);
+
+  if(event == LV_EVENT_VALUE_CHANGED) {
+      static char buf[4];                                 /* max 3 bytes  for number plus 1 null terminating byte */
+      snprintf(buf, 4, "%u", lv_slider_get_value(slider));
+      lv_label_set_text(slider_label, buf);               /*Refresh the text*/
+  }
+}
+
+void printEvent(String Event, lv_event_t event)
+{
+  
+  Serial.print(Event);
+  printf(" ");
+
+  switch(event) {
+      case LV_EVENT_PRESSED:
+          printf("Pressed\n");
+          break;
+
+      case LV_EVENT_SHORT_CLICKED:
+          printf("Short clicked\n");
+          break;
+
+      case LV_EVENT_CLICKED:
+          printf("Clicked\n");
+          break;
+
+      case LV_EVENT_LONG_PRESSED:
+          printf("Long press\n");
+          break;
+
+      case LV_EVENT_LONG_PRESSED_REPEAT:
+          printf("Long press repeat\n");
+          break;
+
+      case LV_EVENT_RELEASED:
+          printf("Released\n");
+          break;
+  }
+}
+

nodemcuv2/lv_arduino/examples/ESP32_TFT_eSPI_Slider/ESP32_TFT_eSPI_Slider.ino

@@ -0,0 +1,83 @@
+#include <lvgl.h>
+#include <TFT_eSPI.h>
+
+#define LVGL_TICK_PERIOD 60
+
+//Ticker tick; /* timer for interrupt handler */
+TFT_eSPI tft = TFT_eSPI(); /* TFT instance */
+static lv_disp_buf_t disp_buf;
+static lv_color_t buf[LV_HOR_RES_MAX * 10];
+
+lv_obj_t * slider_label;
+int screenWidth = 480;
+int screenHeight = 320;
+  
+#if USE_LV_LOG != 0
+/* Serial debugging */
+void my_print(lv_log_level_t level, const char * file, uint32_t line, const char * dsc)
+{
+
+  Serial.printf("%s@%d->%s\r\n", file, line, dsc);
+  delay(100);
+}
+#endif
+
+/* Display flushing */
+void my_disp_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+  uint16_t c;
+
+  tft.startWrite(); /* Start new TFT transaction */
+  tft.setAddrWindow(area->x1, area->y1, (area->x2 - area->x1 + 1), (area->y2 - area->y1 + 1)); /* set the working window */
+  for (int y = area->y1; y <= area->y2; y++) {
+    for (int x = area->x1; x <= area->x2; x++) {
+      c = color_p->full;
+      tft.writeColor(c, 1);
+      color_p++;
+    }
+  }
+  tft.endWrite(); /* terminate TFT transaction */
+  lv_disp_flush_ready(disp); /* tell lvgl that flushing is done */
+}
+
+bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data)
+{
+    uint16_t touchX, touchY;
+
+    bool touched = tft.getTouch(&touchX, &touchY, 600);
+
+    if(!touched)
+    {
+      return false;
+    }
+
+    if(touchX>screenWidth || touchY > screenHeight)
+    {
+      Serial.println("Y or y outside of expected parameters..");
+      Serial.print("y:");
+      Serial.print(touchX);
+      Serial.print(" x:");
+      Serial.print(touchY);
+    }
+    else
+    {
+
+      data->state = touched ? LV_INDEV_STATE_PR : LV_INDEV_STATE_REL; 
+  
+      /*Save the state and save the pressed coordinate*/
+      //if(data->state == LV_INDEV_STATE_PR) touchpad_get_xy(&last_x, &last_y);
+     
+      /*Set the coordinates (if released use the last pressed coordinates)*/
+      data->point.x = touchX;
+      data->point.y = touchY;
+  
+      Serial.print("Data x");
+      Serial.println(touchX);
+      
+      Serial.print("Data y");
+      Serial.println(touchY);
+
+    }
+
+    return false; /*Return `false` because we are not buffering and no more data to read*/
+}

nodemcuv2/lv_arduino/examples/ESP32_TFT_eSPI_Slider/Loop.ino

@@ -0,0 +1,5 @@
+void loop() {
+
+  lv_task_handler(); /* let the GUI do its work */
+  delay(5);
+}

nodemcuv2/lv_arduino/examples/ESP32_TFT_eSPI_Slider/Readme.md

@@ -0,0 +1,44 @@
+# Example for lv_arduino using a slider
+
+This example has the screen set to 320x480 (ILI9488), change this by altering the following lines in the main ino file:
+
+```C
+int screenWidth = 480;
+int screenHeight = 320;
+```
+
+## Backlight
+
+Change pin 32 to your preferred backlight pin using a PNP transistor (2N3906) or remove the following code and connect directly to +ve:
+
+```C
+  ledcSetup(10, 5000/*freq*/, 10 /*resolution*/);
+  ledcAttachPin(32, 10);
+  analogReadResolution(10);
+  ledcWrite(10,768);
+```
+
+## Theme selection
+
+Change the following to change the theme:
+
+```C
+  lv_theme_t * th = lv_theme_night_init(210, NULL);     //Set a HUE value and a Font for the Night Theme
+  lv_theme_set_current(th);
+```
+
+## Calibration
+
+This is using the bodmer tft_espi driver for touch. To correctly set the calibration load the calibration sketch and replace the following with your values:
+
+```C
+uint16_t calData[5] = { 275, 3620, 264, 3532, 1 };
+```
+
+## Screen rotation
+
+Check the following if you need to alter your screen rotation:
+
+```C
+  tft.setRotation(3);
+```

nodemcuv2/lv_arduino/examples/ESP32_TFT_eSPI_Slider/Setup.ino

@@ -0,0 +1,68 @@
+void setup() {
+
+  ledcSetup(10, 5000/*freq*/, 10 /*resolution*/);
+  ledcAttachPin(32, 10);
+  analogReadResolution(10);
+  ledcWrite(10,768);
+
+  Serial.begin(115200); /* prepare for possible serial debug */
+
+  lv_init();
+
+  #if USE_LV_LOG != 0
+    lv_log_register_print_cb(my_print); /* register print function for debugging */
+  #endif
+
+  tft.begin(); /* TFT init */
+  tft.setRotation(3);
+
+  uint16_t calData[5] = { 275, 3620, 264, 3532, 1 };
+  tft.setTouch(calData);
+
+  lv_disp_buf_init(&disp_buf, buf, NULL, LV_HOR_RES_MAX * 10);
+
+  /*Initialize the display*/
+  lv_disp_drv_t disp_drv;
+  lv_disp_drv_init(&disp_drv);
+  disp_drv.hor_res = screenWidth;
+  disp_drv.ver_res = screenHeight;
+  disp_drv.flush_cb = my_disp_flush;
+  disp_drv.buffer = &disp_buf;
+  lv_disp_drv_register(&disp_drv);
+
+  /*Initialize the input device driver*/
+  lv_indev_drv_t indev_drv;
+  lv_indev_drv_init(&indev_drv);             /*Descriptor of a input device driver*/
+  indev_drv.type = LV_INDEV_TYPE_POINTER;    /*Touch pad is a pointer-like device*/
+  indev_drv.read_cb = my_touchpad_read;      /*Set your driver function*/
+  lv_indev_drv_register(&indev_drv);         /*Finally register the driver*/
+
+  //Set the theme..
+  lv_theme_t * th = lv_theme_material_init(LV_THEME_DEFAULT_COLOR_PRIMARY, LV_THEME_DEFAULT_COLOR_SECONDARY, LV_THEME_DEFAULT_FLAG, LV_THEME_DEFAULT_FONT_SMALL , LV_THEME_DEFAULT_FONT_NORMAL, LV_THEME_DEFAULT_FONT_SUBTITLE, LV_THEME_DEFAULT_FONT_TITLE);     
+  lv_theme_set_act(th);
+
+  lv_obj_t * scr = lv_cont_create(NULL, NULL);
+  lv_disp_load_scr(scr);
+
+  //lv_obj_t * tv = lv_tabview_create(scr, NULL);
+  //lv_obj_set_size(tv, lv_disp_get_hor_res(NULL), lv_disp_get_ver_res(NULL));
+
+  /* Create simple label */
+  lv_obj_t *label = lv_label_create(lv_scr_act(), NULL);
+  lv_label_set_text(label, "Hello Arduino! (V7.0)");
+  lv_obj_align(label, NULL, LV_ALIGN_CENTER, 0, -50);
+
+  /* Create a slider in the center of the display */
+  lv_obj_t * slider = lv_slider_create(lv_scr_act(), NULL);
+  lv_obj_set_width(slider, screenWidth-50);                        /*Set the width*/
+  lv_obj_set_height(slider, 50);
+  lv_obj_align(slider, NULL, LV_ALIGN_CENTER, 0, 0);    /*Align to the center of the parent (screen)*/
+  lv_obj_set_event_cb(slider, slider_event_cb);         /*Assign an event function*/
+
+  /* Create a label below the slider */
+  slider_label = lv_label_create(lv_scr_act(), NULL);
+  lv_label_set_text(slider_label, "0");
+  lv_obj_set_auto_realign(slider, true);
+  lv_obj_align(slider_label, slider, LV_ALIGN_OUT_BOTTOM_MID, 0, 10);
+
+}